Colorbond® steel is the most common boundary fence in Melbourne’s East for good reasons: it is quick to install, low maintenance and comes pre-finished in a range of colours. The colour choice is the part most people agonise over, so here is how we talk it through with clients.
Start with the house, not the swatch
Look at the two or three fixed colours you already have: roof, gutters and fascia, window frames, brick or render. A fence that echoes one of those will always look intentional. A fence that introduces a fourth colour rarely does.
Dark, mid or light?
- Dark tones (Monument®, Night Sky®, Ironstone®) read as crisp and modern, hide dirt well and make greenery pop. They absorb more heat, which matters for a north-facing pool fence you touch on a hot day.
- Mid tones (Basalt®, Woodland Grey®, Windspray®) are the safe middle ground and suit most brick and render houses.
- Light tones (Surfmist®, Shale Grey®, Dune®) open up a narrow yard and stay cooler, but show marks and dust more readily.
Check it in the actual light
Swatches on a screen or under shop lighting are misleading. Ask for a physical colour chip, hold it against the house at midday and again in the late afternoon. Grey-based colours in particular shift between warm and cool depending on the sky.
Posts, rails and gates
Most people match posts and rails to the sheets. Contrasting posts can look sharp on a modern build, but keep it deliberate. If we are fabricating a steel gate to sit in a Colorbond® fence, we powder-coat it to the matching Colorbond® colour so the entrance reads as one piece.
What we supply
We fabricate and install Colorbond® fencing, gates and the steel posts and frames that go with them. See the current colour range on our fencing page, or ask us to bring chips to your site visit.
Colorbond® and the colour names above are registered trade marks of BlueScope Steel Limited.
